Ricoh D025 Service Manual page 823

[CE Login]
5169
If you will change the printer bit switches, you must 'log in' to service mode with
this SP before you go into the printer SP mode.
001 CE Login
[By-pass Size Error Detection]
5179
Turns on or off the by-pass tray size error message.
001 -
[Size Adjust]
5181
Adjusts the paper size for each tray.
001 TRAY 1
002 TRAY 2: 1
003 TRAY 2: 2
004 TRAY 2: 3
SM Appendix
[0 or 1 / 0 / - ]
*CTL 0: Disabled
1: Enabled
[0 or 1 / 0 / 1/step]
0: OFF
1: ON (Paper size error message is
*ENG
displayed when the paper jam occurs due
to the wrong direction of set paper in
by-pass mode.)
[0 to 3 / 0 (EU/ASIA), 1 (NA) / 1 /step]
*ENG
0: A4 LEF, 1: LT LEF, 2: B5 LEF, 3: A5 LEF
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
*ENG
0: A4 LEF, 1: LT LEF
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
*ENG
0: A3, 1: DLT
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
*ENG
0: B4, 1: LG
8-227
System Service Mode
D023/D025