Ricoh D025 Service Manual page 140

4. Remove the two securing brackets [B] (
optional paper tray (
5. Remove the harness cover bracket [D] (
6. Pull out tray 2 from the mainframe.
7. Replace the shoulder screw [E] with the washer screw [F], using securing bracket [G]
( x 1).
1. Connect the harness [H] to the connector [I] of the tray heater.
2. Route the harness [H] as shown and clamp it with four clamps (
D023/D025
x 1 each), and then the rear cover [C] of the
x 2).
x 1).
2-92
x 4).
SM