Ricoh D025 Service Manual page 787

[Toner Collection Bottle Full Detection]
3800
Displays/ adjusts the toner collection bottle detection settings. These SPs are
used for NRS.
001 Condition
002 Detection Times
003 Print Page After Near Full
004 Pixel Count After Near Full
Pixel Count After
005
Replacement
008 Coefficient
Notice Setting
011
NOTE:
If the toner collection bottle has been replaced before the machine detects used
toner near full when this setting is set to "0", the machine cannot detect toner
collection bottle near full. In that case, set SP3-902-017 to "1".
Day Threshold: Toner
Collection bottle:NF
012
Sets the threshold days for the near-full display. The near-full of the toner
collection bottle is displayed after the toner collection full sensor has detected
the actuator in the toner collection bottle.
SM Appendix
*CTL [0 to 4 / 0 / 1 /step]
*CTL [0 to 50 / - / 1 /step]
*CTL [0 to 1000 / 0 / 1 sheet/step]
*CTL [0 to 200000 / - / 1 cm
Displays the pixel counter after
*CTL replacement of toner collection bottle.
[0 to 200000 / - / 1 cm
*ENG [0.5 to 1.5 / 1 / 0.1 /step]
Enables or disables the calling for
@Remote.
*ENG
[0 or 1 / 1 / - ]
0: Enable @Remote calling
1: Disable @Remote calling
*ENG [1 to 30 / 5 / 1 day/step]
8-191
System Service Mode
2
/step]
2
/step]
D023/D025