Ricoh D025 Service Manual page 716

System Service Mode
[Special 1: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2772
plate at the paper leading edge between the erase margin area and the image
area.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: Plain: 1st Side
[Special 1: Trailing Edge Correction] Special 1 Paper: Trailing Edge
Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2773
edge in each mode. SP2753 and SP2757 are multiplied by these SP values.
Plain: 154 mm/sec, Fine: 77 mm/sec
The paper trailing edge area can be adjusted with SP2774.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: Plain: 1st Side
D023/D025
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 50 / 0 / 1 mm/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
8-120 SM Appendix