Ricoh D025 Service Manual page 711

[Thick 3: Trailing Edge Correction]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2657
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 3: Environment Correction] Thick 3 Paper: MM Environment
Coefficient Adjustment
2660
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2651 and SP2652 are multiplied by these SP values.
001 Separation DC: 1st Page
002
Adjusts the environment coefficient for each mode. When the environment is
2660
detected as MM, SP2650 is multiplied by these SP values.
003 Paper Transfer: Thick 3: 2nd Side
004 Separation DC: Thick 3: 2nd Side:
005 Paper Transfer: FC: 1st Side
SM Appendix
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
[1 to 60 / 22 / 1 /step]
*ENG
*ENG
[1 to 60 / 11 / 1 /step]
*ENG
*ENG [1 to 60 / 55 / 1 /step]
8-115
System Service Mode
D023/D025