Ricoh D025 Service Manual page 822

System Service Mode
5128 [Code Mode With Key/Card Option]
001 DFU
5131 [Paper Size Type Selection]
The program selects a paper size system from the following alternatives: the
001
AB system (0), the LT system (1), and the AF system (2).
5150 [By-Pass Length Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
001 Normally the paper length for sub scanning paper from the by-pass tray is
limited to 600 mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method]
001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional]
Enables or disables the automatic print out without an accounting device. This
5167
SP is used when the receiving fax is accounted by an external accounting
device.
Fax Printing Mode at
001
Optional Counter Off
D023/D025
*CTL -
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
*CTL
[0: OFF/ 1: ON]
*CTL [0: Soft Key Set/ 1: Hard Key Set]
[0 or 1 / 0 / - ]
*CTL 0: Automatic printing
1: No automatic printing
8-226 SM Appendix