Ricoh D025 Service Manual page 728

System Service Mode
[Special 3: Trailing Edge Correction] Special 3 Paper: Trailing Edge
Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2873
edge in each mode. SP2852 and SP2857 are multiplied by these SP values.
Thick 1 and Thick 2&Fine: 77 mm/sec
The paper trailing edge area can be adjusted with SP2874.
001 Paper Transfer: Thick 1: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
003 Paper Transfer: Thick 1: 1st Side
005 Separation DC: Thick 1: 1st Side
006 Separation DC: Thick 1: 2nd Side
007 Separation DC: Plain: 1st Side
[Special 3: Switch Timing: Trail. Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2874
plate at the paper trailing edge between the erase margin area and the image
area.
Thick 1 and Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
003 Paper Transfer: Thick 1: 1st Side
005 Separation DC: Thick 1: 1st Side
006 Separation DC: Thick 1: 2nd Side
007 Separation DC: Thick 1: 1st Side
D023/D025
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
8-132 SM Appendix