Ricoh D025 Service Manual page 859

5828 [Network Setting]
050 1284 Compatibility (Centro)
052 ECP (Centro)
065 Job Spooling
Job Spooling Clear: Start
066
Time
069 Job Spooling (Protocol)
SM Appendix
*CTL
-
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
This SP is activated only when
SP5-828-50 is set to "1".
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
Treatment of the job when a spooled job exists
at power on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
Validates or invalidates the job spooling
function for each protocol.
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: (Reserved)
8-263
System Service Mode
D023/D025