Ricoh D025 Service Manual page 802

System Service Mode
4602 [Scanner Memory Access]
001 Scanner Memory Access
002 Address Set
003 Data Set
4603 [AGC Execution]
001 HP Detection Enable
002 HP Detection Disable
4604 [FGATE Open/Close] DFU
001 -
4609 [Gray Balance Set: R]
001 Book Read
002 DF Read
4610 [Gray Balance Set: G]
001 Book Read
002 DF Read
D023/D025
Enables the read and write check for the
-
SBU registers.
-
Not used
-
-
[0 or 1 / 0 / 1/step] Executes the AGC.
- [0 or 1 / 0 / 1/step] DFU
Opens or closes the FGATE signal. This
SP automatically returns to the default
- status (close) after exiting this SP.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
- [-512 to 511 / -46 / 1 digit/step]
- [-512 to 511 / -46 / 1 digit/step]
-
[-512 to 511 / -20 / 1 digit/step]
- [-512 to 511 / -20/ 1 digit/step]
8-206 SM Appendix