Ricoh D025 Service Manual page 743

Repeat: Interrupt
007
Specifies the maximum number of repeats of the toner density adjustment during
printing. DFU
Toner Supply Coefficient
008
Adjusts the time for the toner supply mode when a toner density is detected to be
low.
Consumption pattern: Bk
009
Specifies the belt mark generating time for checking the black toner density when
toner density is detected to be low at the toner density adjustment.
Consumption pattern: M
010
Specifies the belt mark generating time for checking the magenta toner density
when toner density is detected to be low at the toner density adjustment.
Consumption pattern: C
011
Specifies the belt mark generating time for checking the cyan toner density when
toner density is detected to be low at the toner density adjustment.
Consumption pattern: Y
012
Specifies the belt mark generating time for checking the yellow toner density
when toner density is detected to be low at the toner density adjustment.
T1 Bias: Bk
013
Adjusts the image transfer belt bias for Black.
T1 Bias: M
014
Adjusts the image transfer belt bias for Magenta.
T1 Bias: C
015
Adjusts the image transfer belt bias for Cyan.
SM Appendix
*ENG
*ENG [0 to 25.5 / 10 / 0.1 sec/step]
*ENG
[0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 80 / 20 / 1 µA/step]
*ENG
[0 to 80 / 20 / 1 µA/step]
*ENG [0 to 80 / 22 / 1 µA/step]
8-147
System Service Mode
[0 to 9 / 0 / 1 time/step]
D023/D025