Shifting The Reel - Sony DSR-570WS Service Manual

2-7. Shifting the Reel

2-7-1. When the power can be turned ON
1. Turn off the power switch.
2. Remove the left panel and cassette compartment lid.
(Refer to Section 2-2-1.)
3. Disconnect the connector CN1 from the CC-68 board.
4. Turn on the power switch.
5. Press the EJECT button to set the unit in EJECT state.
6. Press the switch on the MT-114 board. The reel is
shifted alternately between the standard cassette
position and mini cassette position every time you press
the switch.
2-7-2. When the power cannot be turned ON
1. Open the right panel. (Refer to Section 2-2-2.)
2. Remove the DPR-141B and ES-26/26P boards.
(Refer to Section 2-9-4.)
3. Remove the two screws (B2.6 x 4) and remove the
dust-proof sheet. (Refer to step 2 of Section 2-9-5.)
4. Turn the screw as shown in the figure.
Clockwise direction:
Counterclockwise direction: Mini cassette position
m
. Do not turn the screw with excessive force.
. Do not use this screw frequently.
DSR-570WS/570WSP V1
Standard cassette position
Screw
Switch
MT-114 board
2-13