6-1. General Information on
Replacement/Alignment of
Parts
1. Cassette compartment
When replacing parts and adjusting mechanism
parts, unless specified otherwise, remove the
cassette compartment from the unit.
Details on how to replace the cassette
compartment are provided in Section 6-2.
When setting the tape running state without the
cassette compartment, open the cassette lid, and
secure the lid with a tape, etc.
Mini cassette
. Move the one claw as shown in the figure, and
open the lid.
Standard cassette
. Move the two claws as shown in the figure, and
open the lid.
DSR-570WS/570WSP V1
Section 6
Replacement/Alignment of Major Parts
Mini cassette
Standard cassette
Tape
Lid
Claw
Tape
Lid
Claw
Lid
Claw
6-1