Sony DSR-570WS Service Manual page 94

n
When the MENU button is pressed before results are displayed (during adjustments) for Menus No. 601, 605, 607, 608, and
609, "Abort" will be displayed and the adjustments will be stopped. This is displayed until normal operations can be
performed (2 seconds at the shortest).
[||] [||]
[||] is the factory setting [||] [||]
MENU MENU
No. DESCRIPTION
601 CAPSTAN FG
DUTY
ADJUSTMENT
603 SLACK MUTE
SETTING
604 TRACKING
ADJUSTMENT
CENTER ITI
MODE
SELECTION
605 SWITCHING
POSITION
ADJUSTMENT
606 PLAYBACK
MODE
SELECTION
607 REEL FG DUTY
ADJUSTMENT
608 REEL TORQUE
ADJUSTMENT 1
609 REEL TORQUE
ADJUSTMENT 2
Buttons used: RESET → RESET (MENU SET) button, ADV. → ADVANCE button, MENU → MENU button, SHIFT
→ SHIFT button. For basic operation of buttons, refer to the beginning of Section 4-1. Menu (LCD).
4-8
DISPLAY WINDOW (LCD)
(Adjusting)
on/ oFF
oFF /10/5/20
(Adjusting)
Aut /10/15
(Adjusting)
BUTTON CONTENTS
USED
RESET When the RESET (MENU SET) buttons is pressed, capstan
FG DUTY automatic adjustment is started. After the
adjustment, data is written in the EEPROM, and the
adjustment results are displayed on the display window
(LCD) (YES or no).
(For details, refer to Section 10 VTR Block Electrical Alignment.)
ADV. Sets slack detection mute ON/OFF.
on: Slack mute ON
oFF: Slack mute OFF
Press the RESET (MENU SET) button, and set slack
mute ON/OFF using the ADVANCE button.
Note) This setting is effective only while the power is turned
ON. When the power is turned OFF, it is automatically
turned OFF.
ADV. Selects single frequency during recording/playback and
recording in the center ITI mode.
oFF: when the normal recording/playback mode is set.
10: Single frequency is 10 MHz during recording
5: Single frequency is 5 MHz during recording
20: Single frequency is 20 MHz during recording
Note) This setting is effective only while the power is turned
ON. When the power is turned OFF, it is automatically
turned OFF.
RESET Performs automatic adjustments of the switching position.
(For details, refer to Section 7 Tape Path Alignment.)
ADV. Selects playback mode.
Aut: Data is detected and mode is automatically determined.
10: Fixed at SP mode.
15: Fixed at SSP mode.
RESET Automatically adjusts the reel FG DUTY.
YES: Adjustment OK
no: Adjustment NG
(For details, refer to Section 10 VTR Block Electrical Alignment.)
STOP Adjusts the reel torque.
F.FWD YES: Ends after saving adjustment data.
REW no: Adjustment NG and error cause
EJECT (For details, refer to Section 6-38.)
Adjusts the reel torque.
YES: Ends after saving adjustment data.
no: Adjustment NG and error cause
(For details, refer to Section 6-38.)
DSR-570WS/570WSP V1