Sony DSR-570WS Service Manual page 162

6-32. Replacement of Reel Plate
Pressing Link Assembly
Replacement Flowchart
Removal of SV-213 board
Removal of TR band assembly
Removal of sub reel gear (S) assembly
Removal of S side reel table assembly
Removal of S reel plate assembly
Removal of sub reel gear (T) assembly
Removal of T side reel table assembly
Removal of T reel plate assembly
Removal of reel moving arm assembly
Replacement of reel plate pressing link assembly
Reel table FWD/REV rewinding torque check/adjustment
TR arm assembly position check/adjustment
FWD back tension check/adjustment
Check after tracking adjustment
Check of self-recording tape playback
6-44
Removal
1. Remove the SV-213 board. (Refer to Section 2-9-8.)
2. Remove the TR band assembly. (Refer to Section 6-12.)
3. Remove the sub reel gear (S) assembly.
(Refer to Section 6-10.)
4. Remove the S side reel table assembly. (Refer to Section 6-4.)
5. Remove the S reel plate assembly. (Refer to Section 6-19.)
6. Remove the sub reel gear (T) assembly.
(Refer to Section 6-11.)
7. Remove the T side reel table assembly. (Refer to Section 6-5.)
8. Remove the T reel plate assembly. (Refer to Section 6-20.)
9. Remove the reel moving arm assembly.
(Refer to Section 6-31.)
DSR-570WS/570WSP V1