Sony DSR-570WS Service Manual page 106

. . . . . Page 18 Clip / Iris Related Setting
PAGE18 (NEXT PREV
WHT CLIP 255
:
IRIS GAIN : 128
IRIS MODE : 100
IRIS SET : 144
LOW LIGHT 144
:
EXIT MENU (YES PUSH)
. . . . . Page 19 Color Temperature Calculation Reference Setting
PAGE19 (NEXT PREV
COLOR TEMP CAL.
(YES PUSH)
R
: 128
B : 128
EXIT MENU (YES PUSH)
4-20
)
WHT CLIP
IRIS GAIN
IRIS MODE
IRIS SET
LOW LIGHT
COLOR TEMP CAL.
)
m
In COLOR TEMP CAL., it captures the color temperature calculation
reference value during operating of White Balance auto adjusment.
Normally, it is not necessary to perform this adjustment.
If the color temperature value, which is indicated on the screen, differs from
an actual value, perform CCD OUT level adjustment and etc. and to capture
the reference value as follows:
1. Shoot the pattern (color temperature = 3200 K).
2. Set the WHT BAL switch to A or B, and perform Auto White adjust-
ment.
3. Move the cursor on the COLOR TEMP CAL. position and push the
MENU dial.
Standard value setting of white clip level:
Lower value setting makes the clip level low.
Setting of auto iris gain:
Following speed of auto iris can be changed.
Setting of auto iris peak average ratio:
Set the ratio of auto iris's peak and
average values.
Setting of the target value of auto iris:
Setting of low light warning indication level:
For DSR-570WS:
For DSR-570WSP:
Captures the reference value of color temperature
indication
R R channel's color temperature indication ;
. Reference value setting
. Result of capturing the reference value
B B channel's color temperature indication ;
. Reference value setting
. Result of capturing the reference value
Standard Setting
255
128
100
144
144
160
DSR-570WS/570WSP V1