Sony DSR-570WS Service Manual page 123

6-2. Replacement of Cassette
Compartment Assembly
Reel table position: Mini cassette position
Mode: Unthreading end
Removal
1. Eject and turn the cassette compartment
assembly up.
2. Pull out the MT-114 board on the reel shift
motor shown in the figure from the CC-68 board.
3. Loosen the three screws, remove part A from the
square hole, and remove the cassette
compartment assembly.
Attachment
4. Apply a small quantity of the grease SGL-801
(7-651-000-11) to the two square holes (shown
with oblique lines in the figure) on the slide
plate, then apply it in all square holes entirely.
5. Attach the new cassette compartment assembly
and removed parts in the reverse order of steps 1
to 3.
n
Adjust the cassette compartment assembly to the
three protrusion on the mechanism chassis first
before securing the screws.
DSR-570WS/570WSP V1
Cassette compartment assembly
Part A
Screw
Protrusion
Screw
Protrusion
Square hole
Applying grease.
Slide plate
MT-114 board
CC-68
board
Screw
Protrusion
Part A (claw)
6-5