Sony DSR-570WS Service Manual page 143

6-18. Replacement of GL (T)
Assembly
Replacement Flowchart
Removal of capstan motor
Removal of drum assembly
Replacement of GL (T) assembly
Capstan FG DUTY adjustment
Tracking adjustment
Check after tracking adjustment
Check of self-recording tape playback
Switching position adjustment
Removal
1. Remove the capstan motor.
(Refer to Section 6-28.)
2. Remove the drum assembly.
(Refer to Section 6-3.)
3. Rotate the No. 1 gear in the clockwise direction,
and remove the TR arm assembly from rail (S).
Make sure that the pinch roller is not in contact
with rail (T).
4. Remove the screw attaching rail (T), lift up part
a and slide it in the arrow direction and remove
rail (T).
DSR-570WS/570WSP V1
No. 1 gear
TR arm assembly
Rail (T)
Pinch arm assembly
Rail (T)
Pinch roller
Cassette
reference pin
Rail (T)
a
Rail (S)
Not to contact
the pinch roller
Screw
6-25