Sony DSR-570WS Service Manual page 121

1) Setting manually
. Open the left panel assy.
(Refer to Section 2-2-1.)
. Rotate the cap and No. 1 gear shown in the
figure in the arrow direction while pressing it
down to set the threading end/unthreading end.
2) Setting with the menu
Select Menu No. 613, and set the function cam
mode.
. Threading is carried out while the STOP
button is pressed.
. Unthreading is carried out while the EJECT
button is pressed.
3. Reel Table Position
It is set to the mini cassette position/standard
cassette position according to the position of the
S reel table assembly/T reel table assembly.
Mini cassette position:
The reel lock arm, S reel table assembly/T reel
table assembly, and MIC assembly are
positioned at the drum side as shown in the
figure.
Standard cassette position:
The reel lock arm, S reel table assembly/T reel
table assembly, and MIC assembly are
positioned at the inserting side of the cassette as
shown in the figure.
DSR-570WS/570WSP V1
Mini cassette position
S reel table assembly
Reel lock arm
Standard cassette position
S reel table assembly
Reel lock arm
Cap (red)
Threading end
No. 1 gear
Unthreading end
T reel table assembly
MIC assembly
T reel table assembly
MIC assembly
6-3