Sony DSR-570WS Service Manual page 107

. . . . . Page 20 FILTER Display Setting
PAGE20 (NEXT PREV
FILTER1 : 3200
FILTER2 : 5600+1/8ND
FILTER3 : 5600
FILTER4 : 5600+1/64ND
EXIT MENU (YES PUSH)
. . . . . Page 21 Self Diagnosis 1
PAGE21 (NEXT PREV
DIAG ERROR RESET
(YES PUSH)
MEMORY BACKUP
(YES PUSH)
EXIT MENU (YES PUSH)
Refer to Section 3-5 Self Diagnosis for Page 22 to 24.
DSR-570WS/570WSP V1
FILTER 1 to 4
)
Set the screen indication in accordance with a kind of filter attached.
Setting
1. Turn the MENU dial to move the cursor to FILTER No. on the screen.
2. Push the MENU dial.
3. Turn the MENU dial to display the indication to be set.
By turning the MENU dial, indication will be changed as follows:
3200 5 CROSS 5 5600 5 5600 + 1/4ND 5 5600 +
1/8ND 5 5600 + 1/16ND 5 5600 + 1/32ND 5 5600 + 1/64ND
4. To set the indication, push the MENU dial.
DIAG ERROR RESET
)
This item is used for erasing an error check results and a history of
error items.
MEMORY BACKUP
This item is used when back up the EEPROMs data on the TG, DPR,
and ES boards to EEPROM on the AT board. Backup is needed
when the TG, DPR, or ES board has been replaced.
If there is a communication error between the TG, DPR, or ES
board's EEPROM and microcomputer when the power is turned on,
be sure to use the backed up data in EEPROM on the AT board.
To back up the memory
1. Turn the MENU dial to move the cursor to MEMORY BACKUP position.
2. Push the MENU dial.
n
The "DIAG ERROR RESET" and "MEMORY BACKUP" will be carried
out when the RESET in Page 1 is executed.
4-21