Sony DSR-570WS Service Manual page 137

6-15. Replacement of Sensor
Attachment Plate Assembly
Removal
1. Remove one screw shown in the figure, and
remove the E sensor holder of the SE-295 board.
2. Remove one screw and remove the sensor
attachment plate assembly.
Attachment
3. Adjust the new sensor attachment plate assembly
to the protrusions as shown in figure, and secure
with the screw.
4. Attach the E sensor holder in the reverse order of
step 1.
DSR-570WS/570WSP V1
SE-295 board
Screw
Sensor
attachment plate
assembly
Protrusion
Screw
E sensor holder
6-19