Table of Contents
Advertisement
(4) When replacing the CCD unit, be sure to perform the
following adjustment items.
9-3-10. Black Level Adjustment
9-3-11. Carrier Adjustment when DPR (Dual Pixel
Readout) is On
9-3-12. Shading Adjustment
9-3-13. Flare Adjustment
(5) If the amplitude level of the measured waveform is
blurred on the waveform monitor screen, set the
RESPONSE switch on the waveform monitor to
"LUM" mode.
(6) Be sure to perform the following adjustments
successively.
9-3-3. Y/R-Y/B-Y CLP Level Adjustment
9-3-4. Y/SYNC/R-Y/B-Y Level Adjustment
9-3-5. Carrier Balance Adjustment
9-3-6. Chroma (VBS) Level Adjustment
9-3-7. Y (VBS) Level Adjustment
9-3-8. VF SYNC/BLKG Level Adjustment
9-3-9. CCD Output Level Adjustment
DSR-570WS/570WSP V1
9-1-5. Adjustment Item
9-2. Preparation before Adjustment
9-2-1. Color-Bar Signal Confirmation
9-2-2. Sensitivity Measurement Confirmation
9-3. Adjustment
9-3-1. Sub-carrier Frequency Adjustment
9-3-2. INT SC-H Phase Adjustment
9-3-3. Y/R-Y/B-Y CLP Level Adjustment
9-3-4. Y/SYNC/R-Y/B-Y Level Adjustment
9-3-5. Carrier Balance Adjustment
9-3-6. Chroma (VBS) Level Adjustment
9-3-7. Y (VBS) Level Adjustment
9-3-8. VF SYNC/BLKG Level Adjustment
9-3-9. CCD Output Level Adjustment
9-3-10. Black Level Adjustment
9-3-11. Carrier Adjustment when DPR (Dual Pixel
Readout) is On
9-3-12. Shading Adjustment
9-3-13. Flare Adjustment
9-3-14. Character Position Adjustment
9-3-15. 4:3 Title Adjustment
9-3-16. TONE Level Adjustment
9-4. Changing the Standard Setting Values (Video Level)
9-4-1. Changing Black Level and Gamma Settings
9-4-2. Changing Manual Knee and White Clip
Settings
9-4-3. Changing Flare Setting
9-3
Hide quick links:
Advertisement
Table of Contents
