Sony DSR-570WS Service Manual page 140

6-17. Replacement of GL (S)
Assembly
Replacement Flowchart
Removal of capstan motor
Removal of drum assembly
Replacement of GL (S) assembly
Capstan FG DUTY adjustment
Tracking adjustment
Check after tracking adjustment
Check of self-recording tape playback
Switching position adjustment
Removal
1. Remove the capstan motor.
(Refer to Section 6-28.)
2. Remove the drum assembly.
(Refer to Section 6-3.)
3. Rotate the No. 1 gear in the clockwise direction
until the TR arm assembly separates from rail
(S).
4. Remove the screw attaching rail (S), and remove
it by holding the a part and sliding it in the
arrow direction.
6-22
TR arm assembly
Threading gear
a
No. 1 gear (cap)
Rail (S)
Screw
Rail (S)
DSR-570WS/570WSP V1