Mb-833 Board - Sony DSR-570WS Service Manual

2-9-14. MB-833 Board

1. Remove the left and right panels.
(Refer to Sections 2-2-1 and 2-2-2.)
2. Remove the rear panel assembly and DC-DC converter.
(Refer to Section 2-2-4 and 6-35.)
3. Remove the ES-26/26P, DPR-141B, AT-150B, VA-
190, CN-2277, PS-570, and CP-373 boards. (Refer to
Sections 2-9-4, 2-9-6, 2-9-7, 2-9-11, 2-9-12,
and 2-9-13.)
4. Remove the screw (B2.6 x 4), and remove the dust-
proof sheet. (Refer to Section 2-9-8.)
5. Disconnect the two connectors (CN22 and CN23) and
eight flat cables (CN1, CN2, CN3, CN5, CN10, CN11,
CN14, and CN15) from the MB-833 board.
6. Remove the three screws (B2.6 x 4) and remove the
MB-833 board.
7. Return the board to its original position with the
reverse procedures of removal.
DSR-570WS/570WSP V1
CN10
B2.6 x 4
CN15
CN5
CN14
CN11
CN23
MB-833 board
CN3
CN2
CN1
B2.6 x 4
CN22
2-23