6-24. Replacement of TG-3 Guide
Assembly Component Parts
Replacement Flowchart
Replacement of TG-3 guide assembly component parts
TG-3 guide height check/adjustment
Tracking adjustment
Check after tracking adjustment
Check of self-recording tape playback
Removal/Attachment
1. Rotate the guide upper flange shown in the figure
in the counterclockwise direction, and remove
the TG-3 guide assembly component parts.
2. Replace the required parts, and attach the
component parts in the reverse order of step 1.
Check/Adjustment
3. Perform TG-3 guide height check adjustment.
(Refer to Section 6-37.)
4. Perform the tracking adjustment.
(Refer to Section 7-3.)
5. Perform the check after tracking adjustment.
(Refer to Section 7-4.)
6. Perform the check of self-recording tape
playback. (Refer to Section 7-5.)
DSR-570WS/570WSP V1
TG-3 nut
TG-3 roller
TG-3 lower flange
TG-3 upper flange
TG-3 sleeve
Compression coil
spring
6-33