Konica Minolta bizhub C353 Service Manual page 960

Field Service Ver. 3.0 Jan. 2008
(3) Tray Up
• The elevator tray is raised to bin 1. (Bin 1 → Additional bin → Bin 2)
→ The exit opens.
→ The shutter closes.
→ The paper output tray is raised to bin 1.
→ The shutter opens.
→ The exit closes.
→ The operation is finished.
(4) Tray Down
• The elevator tray is lowered from bin 1. (Bin 2 → Additional bin → Bin 1)
→ The exit opens.
→ The shutter closes.
→ The paper output tray is lowered from bin 1.
→ The shutter opens.
→ The exit closes.
→ The operation is finished.
(5) Punch Drive Standard Holes (appears only when the punch kit PK-515 is
installed)
• The punch is driven once at a standard hole.
→ The operation is finished.
(6) Punch Drive MC 2Holes (appears only when the punch kit PK-515 is installed)
• The punch is driven once at a 2holes.
→ The operation is finished.
(7) Outlet Open & Close
• Opens and closes the exit.
→ The exit opens.
→ Stops after the predetermined time.
→ The exit closes.
→ The operation is finished.
(8) Fold Drive (appears only when the saddle kit SD-505 is installed)
See P.29 of the SD-505 service manual.
(9) Saddle Outlet Open & Close (appears only when the saddle kit SD-505 is
installed)
See P.29 of the SD-505 service manual.
(10) Conveyance Drive (appears only when the saddle kit SD-505 is installed)
See P.29 of the SD-505 service manual.
(11) Shutter Drive
• Opens and closes the shutter.
→ The exit opens.
→ The shutter closes.
→ Stops after the predetermined time.
→ The shutter opens.
→ The exit closes.
→ The operation is finished.
(12) Bin SL Drive (appears only when the mail bin kit MT-502 is installed)
See P.10 of the MT-502 service manual.
6. Finisher operations
63