Konica Minolta bizhub C353 Service Manual page 87

3. Periodical check
C. Reinstall procedure
[1]
3. Close the right door.
4. Turn ON the main power switch.
5. Select [Service Mode] → [Imaging Process Adjustment] → [Gradation Adjust] and
carry out gradation adjust.
See P.362
42
[1]
A02EF2C032DA
A02EF2C033DA
Field Service Ver. 4.0 Jun. 2008
1. Insert the transfer belt unit [1].
NOTE
• Insert the transfer belt unit with
care not to allow its docking gear to
be damaged by hitting it against the
rail or associated part.
• Do not touch the surface of the
image transfer belt unit.
• Cover the image transfer belt unit
with something such shade cloth to
protect its surface from dust or for-
eign matter.
2. Install the transfer belt unit with two
screws [1].
NOTE
• Replace the ozone filter, which is
supplied with the transfer belt unit,
at the same time.