Konica Minolta bizhub C353 Service Manual page 800

Field Service Ver. 2.0 Jan. 2008
5. Call the Service Mode to the screen.
See P.338 of the main body service manual.
6. Touch [ADF].
7. Touch [Feed Zoom].
8. Touch [Orig. Feed Zoom Ad].
9. Enter the value using the [-]/[+] keys.
• If the difference in the widths of c is greater than the specifications, enter the - value.
• If the difference in the widths of c is smaller than the specifications, enter the + value.
10. Touch [END].
11. Touch [Exit] on the Service Mode screen.
12. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
13. Make a copy of the chart again and check that the difference in the widths of a falls
within the specified range.
7. Mechanical adjustment
A01HF3E533DA
51