Konica Minolta bizhub C353 Service Manual page 110

Field Service Ver. 4.0 Jun. 2008
13. Click [Yes], and data writing starts.
NOTE
• Writing a card is a resource intensive operation for your computer - do not attempt
to multitask (use the computer for anything else) during the writing procedure.
14. When the writing is completed, the following screen appears.
In this screen, check sums will be compared between the firmware data and one writ-
ten into the compact flash.
NOTE
• The contents displayed on the screen may different according to the model type.
The above is the screen displayed for firmware data writing of bizhub C450.
15. Confirm each check sums are identical and quit Firmware Imaging Toolkit 2006.
16. Take out the compact flash from the PC.
NOTE
• When removing the compact flash, be sure to check if data is written as normal
and then remove it according to the precise removing method.
5. Firmware upgrade
9J06F2E717DA
65