Konica Minolta bizhub C353 Service Manual page 302

Field Service Ver. 4.0 Jun. 2008
<IP Address Fax>
• Setting will be available only when [IP Address FAX] is set to "ON" in the following set-
tings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
Functions
• To register/change the IP address fax destination when transmitting the IP address
fax data.
Use
Setting/ • A new address can be registered by touching [New].
Procedure • Select any displayed address to check, change or delete the setting.
<Internet Fax>
• Setting will be available only when [Internet FAX] is set to "ON" in the following settings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
Functions
• To register/change the Internet fax address when transmitting the internet fax data.
Use
Setting/ • A new address can be registered by touching [New].
Procedure • Select any displayed address to check, change or delete the setting.
(2) Group
Functions
• To register or change the group with a number of addresses to transmit data simulta-
neously.
Use
Setting/ • Touch [New] to register the new group.
Procedure • elect any displayed group to check, edit, or delete the setting.
• At least one address must be registered in order to register the group.
(3) E-mail Settings
• It will not be displayed when the management device 2 is set to "Set" by the following set-
ting.
[Service Mode] → [Billing Setting] → [Management Function Choice]
<E-mail Subject>
Functions
• To register the e-mail subject for transmitting the scanned data by e-mail.
Use
Setting/ • Touch [New] to register the new subject.
Procedure • Select any displayed subject to detail check, edit, or delete the setting.
• The subject can be set as default by selecting the subject displayed on the screen
and pressing [Set as Default].
<E-mail Body>
Functions
• To register the e-mail message for transmitting the scanned data by e-mail.
Use
Setting/ • Touch [New] to register the new message.
Procedure • Select any displayed message to detail check or delete the setting.
• The text can be set as default by selecting the text displayed on the screen and
pressing [Set as Default].
8. Utility Mode
257