Replacing The Transfer Roller Unit - Konica Minolta bizhub C353 Service Manual

3. Periodical check
C. Reinstall procedure
[1]
3. Close the front door.
3.4.12

Replacing the transfer roller unit

A. Periodically replacing parts/cycle
• Transfer roller unit: Every 150,000 prints
B. Removal procedure
1. Open the right door.
[1] [2]
C. Reinstall procedure
[1]
3. Close the right door.
34
A02EF2C506DA
[1]
A02EF2C028DA
[2] [1]
A02EF2C194DA
Field Service Ver. 4.0 Jun. 2008
1. Remove a new waste toner box from
its packaging and remove the pack-
ing material.
2. Place the waste toner box [1] in posi-
tion.
2. Unlock the lock levers [1] of the
transfer roller unit (at two places).
3. Holding onto the lock levers [1] (at
two places), remove the transfer
roller unit [2].
1. Holding onto the lock levers [1] (at
two places), mount the new transfer
roller unit [2].
2. Lock the lock levers [1] (at two
places).
NOTE
• Make sure that the levers are locked
in position both at front and rear.