Manual Bypass Tray Adjustment; Lead Edge Erase Adjustment - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 4.0 Jun. 2008
10.4.10

Manual Bypass Tray Adjustment

Functions • To set the maximum width and the minimum width for the manual bypass paper size
unit of the manual bypass guide.
Use • Use when the manual bypass paper size unit of the manual bypass guide has been
changed.
• Use when a false paper size is displayed when the manual bypass is used.
Setting/ 1. Call the Service Mode to the screen.
2. Touch these keys in this order: [Machine] → [Manual Bypass Tray Adjustment].
Procedure
3. Touch [Max. Width].
4. Load the bypass tray with paper having a width of 297 mm.
5. Press the Start key and check that the results are [OK].
6. Touch [Min. Width.].
7. Load the bypass tray with paper having a width of 100 mm.
8. Press the Start key and check that the results are [OK].
✽ Make the adjustment again if the results are [NG].
10.4.11

Lead Edge Erase Adjustment

Functions • To set the leading edge erase amount of the paper.
Use • Upon user requests, it is possible to specify the void area where image is not printed
along the leading edge.
Setting/ • The default setting is 4 mm.
Procedure
NOTE
• When "4 mm" is selected, 4.2 mm is the actual amount to be erased in print
based on the control system of the machine.
"4 mm" 5 mm
10. Service Mode
7 mm
361