Cleaning Of The Scanning Guide; Cleaning Of The Reflective Sensor Section - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 2.0 Jan. 2008
2.1.5

Cleaning of the scanning guide

A. Periodically cleaning parts/cycle
• Scanning guide: Every 50,000 prints
B. Cleaning procedure
1. Open the reverse automatic document feeder.
[1]
2.1.6

Cleaning of the reflective sensor section

A. Periodically cleaning parts/cycle
• Reflective sensor section: Every 50,000 prints
B. Cleaning procedure
[1]
[1]
2. Open the before scanning mylar
3. Using a soft cloth dampened with
NOTE
• Be careful not to damage the mylar.
[2]
9J07F2C525DA
1. Clean the sensor [1] using a brush or
A01HF2C020DA
2. Open the transportation cover.
3. Clean the cloth [1] using a brush or
A01HF2C011DA
2. Periodical check
assy [1].
alcohol, wipe the scanning guide [2]
clean of dirt.
other similar tools.
other similar tools.
13