Konica Minolta bizhub C353 Service Manual page 786

Field Service Ver. 2.0 Jan. 2008
[1]
A01HF3C516DA
A01HF3E529DA
7. Mechanical adjustment
5. Place the chart [1] in the document
feed tray (with the side having an
arrow facing up).
6. Press the Start key.
7. Make sure that result is OK. Then,
touch [SET].
8. Touch [END].
9. Touch [Exit] on the Service Mode
screen.
10. Turn OFF the main power switch,
wait for 10 sec., then turn the switch
ON.
NOTE
If the result is Unable:
• Check and correct the skew of the
document.
• Manually correct the value of [Origi-
nal Stop Position].
See P.40
37