Konica Minolta bizhub C353 Service Manual page 868

Field Service Ver. 3.0 Jan. 2008
[1]
[1]
[1]
[2]
[2]
[1]
A093F2C522DA
[4]
[2]
[1]
[3]
A093F2C523DA
[1]
[2]
[3]
A093F2C524DA
13. Remove four screws [1] and remove
the front trailing edge assy [2].
14. Remove three C-rings [1], the bush-
ing [2], and two gears [3].
15. Remove the feed drum assy [4].
16. Remove two C-rings [1] and two feed
drums [2].
NOTE
• Take care not to lose fixing pins.
• When reinstalling the feed drum,
check that the direction of the wire
coming from both feed drums are
the same.
• Install so that cut parts [3] at both
ends of shaft face up.
3. Other
17