Konica Minolta bizhub C353 Service Manual page 321

8. Utility Mode
C. http Server Settings
• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) http Server Settings
Functions
• To set whether or not to use the http server setting.
Use
Setting/ • The default setting is ON.
Procedure
(2) PSWC Settings
Functions
• To set whether to use the PageScope Web Connection.
Use
Setting/ • The default setting is ON.
Procedure
(3) IPP Settings
Functions
• To set whether to enable or disable IPP (Internet Printing Protocol) setting.
Use
Setting/ • The default setting is ON.
Procedure
(4) Accept IPP jobs
Functions
• To set whether to allow or restrict the IPP job.
Use
Setting/ • The default setting is ON.
Procedure
(5) Support Information
Functions • To set the operation support information.
Use • For the response setting to see if IPP transmission supports each function.
Setting/ 1. Touch [Support Information].
Procedure 2. Set "ON" or OFF for each item.
(6) Printer Information
Functions • To set the printer information.
Use • To set the printer information.
Setting/ 1. Touch [Printer Information].
Procedure 2. Enter the printer name, printer location, and printer information on the on-screen
keyboard.
3. Touch [Print URI] to check the printer URI information.
276
"ON"
"ON"
"ON"
"ON"
Field Service Ver. 4.0 Jun. 2008
OFF
OFF
OFF
OFF