Field Service Ver. 4.0 Jun. 2008
14.1.2
Focus positioning of the scanner and mirrors unit
This adjustment must be made in the following case:
• The scanner drive cables have been rewound
[2]
[1]
A00JF3C008DA
[1]
A00JF3C009DA
14. Mechanical adjustment
1. Move the mirror unit [1] to the center
and push it against the notches [2]
on the rail.
2. When the mirror unit do not push its
both sides against the notches,
loosen two mirror unit adjustment
screws [1] and adjust the mirror unit
position until it pushes its both sides
against the notches.
Tighten the adjustment screw.
3. Then conduct scanner positioning
adjustment.
453