Paper Feed Tray 2 Paper Feed Clutch (Cl2); Manual Paper Feed Clutch (Cl4) - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 4.0 Jun. 2008
6.3.69

Paper feed tray 2 paper feed clutch (CL2)

1. Remove the tray 2 paper feed assy.
See the steps 1 to 5 of tray 2 feed roller/tray 2 pick-up roller removing procedure.
See P.26
[5]
[3]
6.3.70

Manual paper feed clutch (CL4)

1. Remove the manual bypass tray unit.
See P.102
[4]
[1]
[4] [1]
[2]
A02EF2C191DA
[1]
[3] [2]
A02EF2C192DA
[2]
A02EF2C193DA
2. Remove the gear [1].
3. Disconnect the connector [2], and
remove the harness from the wire
saddle [3].
4. Remove the E-ring [4], and remove
the paper feed tray 2 paper feed
clutch [5].
NOTE
• When mounting the paper feed tray
2 paper feed clutch [5], set the con-
vex part of the stopper into the con-
cave part of the paper feed tray 2
paper feed clutch.
2. Remove the harness from the edge
cover [1] and the wire saddle [2], and
remove the screw [3].
3. Remove the metal plate [4].
4. Remove the E-ring [1], and remove
the manual paper feed clutch [2].
NOTE
• When mounting the manual paper
feed clutch [2], set the convex part
of the stopper into the concave part
of the manual paper feed clutch.
6. Other
163