Machine State Led Setting - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 4.0 Jun. 2008
10.8.12

Machine State LED Setting

Functions • To set how to display main body statuses on the machine state LED (state display
lamp, paper empty lamp).
Use
• Each of Type1 and Type2 has the following LED display forms.
Warning statuses
Amount of paper
remaining
(Tray 1 and 2)
Amount of paper
remaining
(Tray 3 and 4, LCT)
Setting/ • Each default setting is Type1.
Procedure
NOTE
1
• [Type 2] is the default setting, if the firmware of function enhanced version 1 or
later is mounted.
Machine State LED Setting
Attention
• Toner supply door open
• Improper toner cartridge placement
Near life
Alert code
Trouble isolation
Fatal error
• Trouble code
• Jam
• Door opened
• Life stop
100 % to 66 % of paper remaining
Near empty
Empty
Being lifted up
Door opened or closed
100 % to 33 % paper remaining
33 % to near empty
Near empty
Empty
Being lifted up
Door opened or closed
"Type 1"
10. Service Mode
Type1 Type2
Blinking Blinking
Blinking Unlit
Unlit Unlit
Blinking Blinking
Lit Lit
Unlit Unlit
Blinking Unlit
Lit Lit
Unlit Unlit
Unlit Unlit
Blinking Unlit
Blinking Unlit
Lit Lit
Unlit Unlit
Type 2
395
1