Adding A Monitor Wall; Configuring A Communication Device - Bosch MBV-BPRO-45 Configuration Manual

Video management system
Table of Contents

Advertisement

Bosch Video Management System
3.
4.
5.
6.
7.
8.
7.18

Adding a monitor wall

Main window >
Main window >
After having added the monitor wall, the user of Operator Client can control this monitor wall.
The user can change the monitor layout and assign encoders to monitors.
To add:
1.
2.
3.
4.
5.
6.
See also
7.19

Configuring a communication device

Main window >
To configure a communication device:
1.
2.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
Bosch Sicherheitssysteme GmbH
Drag each available decoder to an analog monitor image on the right.
The logical number of the decoder is displayed as a black number on the monitor image
and the color of this image changes.
If no decoder is available, unassign a decoder from another analog monitor group or
repeat network scan.
Click the Advanced Configuration tab.
Change the logical numbers of the assigned decoders as required. If you enter an already
used number, a message box is displayed.
Click Quad View to enable quad view for this decoder.
Note:
We do not recommend configuring quad view for H.264 cameras.
In the Initial Camera column, select the desired camera.
In the OSD related columns, select the desired options.
Devices > Right-click
Maps and Structure
Select the desired decoder.
If required, enter the maximum number of monitors and configure thumbnails.
Click
.
Click
Maps and Structure.
Drag the monitor wall to the Logical Tree.
If required, configure the access to the monitor wall with corresponding user group
permissions.
Add Monitor Wall dialog box, page 151
Devices > Expand
Click the required device:
Make the appropriate settings.
> Expand
or
.
Configuration Manual
Configuring devices | en
> Click Add Monitor Wall
2013.03 | V1 | Configuration Client
73

Advertisement

Table of Contents
loading

Table of Contents