Bosch Video Management System
See also
–
17.17.1
Add Monitor Wall dialog box
Main window >
Add the required decoder to your Bosch VMS before you add the monitor wall.
Decoder:
Select the decoder that is connected to the monitor wall.
Max. number of monitors:
Type in the number of used decoder channels if you do not want to use all available channels.
If you leave the field empty, the maximum number of channels that is supported by the
decoder, is displayed in Operator Client.
Enable thumbnails
Click to check if you want to display a snapshot in Operator Client for each monitor. This
snapshot is regularly updated.
See also
–
17.18
Communication Devices page
Main window >
Allows you to add or configure a communication device.
You can configure the following communication devices:
–
–
17.18.1
E-mail/SMTP Server dialog box
Main window >
Device command
Allows you to add an e-mail server to your Bosch VMS.
Name:
Type the display name of the e-mail server.
17.18.2
Add SMS Device dialog box
Main window >
command
Allows you to add an SMS device to your system.
Name:
Type the name of the e-mail server that is used for being displayed.
Bosch Sicherheitssysteme GmbH
Adding a monitor wall, page 73
Devices > Right-click
Adding a monitor wall, page 73
Devices > Expand
E-mail
SMS (GSM or SMSC dial-up provider)
Devices > Expand
Devices > Expand
>
> Right-click
> Right-click
Configuration Manual
Devices page | en
> Click Add Monitor Wall
> Add E-mail/SMTP
> Add SMS Device
2013.03 | V1 | Configuration Client
151