Table of Contents
Advertisement
Bosch Video Management System
Assign All
Click to assign all scanned devices to their parent device.
Remove
Click to remove a device from its parent device. The recordings of a removed device are not
removed. You can find them when you add this device again.
Remove All
Click to remove all devices from their parent device. The recordings of a removed device are
not removed. You can find them when you add this device again.
17.5
Failover NVR Manager dialog box
Main window >
Displays status information on your Failover NVRs.
17.6
IP Device Configuration dialog box
Main window >
Displays the following properties of the available IP devices:
–
–
–
–
–
–
–
Allows you to set the following properties of the available IP devices:
–
–
–
You can configure display names, IP addresses and firmware versions for multiple devices at
once.
Click to refresh the state information for all devices (not available on every page). You can
refresh the state of a single device: Right-click the device and click Refresh state.
Note: When you have a large system with several 1000 devices configured, the process of
refreshing states can take a long time.
Update Firmware
Click to update the firmware version of the selected device.
Show Passwords
Click to clear when you want the configured passwords being displayed in readable form.
Bosch Sicherheitssysteme GmbH
Devices >
Devices >
Device name and type
Connection type (BVIP or ONVIF)
IP address
Subnet mask
System password
Firmware version
Gateway IP address
Display name
IP address
Firmware version
Configuration Manual
Devices page | en
137
2013.03 | V1 | Configuration Client
Advertisement
Table of Contents
