Configuring Events And Alarms - Bosch MBV-BPRO-45 Configuration Manual

98 en | Configuring events and alarms
11

Configuring events and alarms

Main window >
or
Main window >
This chapter provides information on how to configure events and alarms in your system.
The available events are grouped beyond their corresponding devices.
In the Events page, you configure when an event in your Bosch VMS triggers an alarm,
executes a Command Script, and is logged.
Example (part of an Event Configuration Table):
This example means:
If the video signal of the selected camera gets lost, an alarm is triggered, the event is logged,
and no script is executed.
In Alarms, you define how an alarm is displayed, and which cameras are displayed and
recorded in case of an alarm.
Some system events are configured as alarms by default.
Follow these references to get detailed information on the available application windows:
–
–
–
–
–
–
2013.03 | V1 | Configuration Client
Events
Alarms
Command Script Editor dialog box, page 210
Create Compound Event / Edit Compound Event dialog box, page 211
Select Script Language dialog box, page 211
Alarm Settings dialog box, page 214
Select Image Pane Content dialog box, page 214
Alarm Options dialog box, page 215
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH