Table of Contents
Advertisement
216
en | Alarms page
Bosch Video Management System
Record
Select a check box to enable alarm recording for this camera in case of an alarm. If an alarm is
triggered, this camera is recorded in alarm recording quality. The duration of the recording is
the duration of the alarm state plus pre- and post-alarm time. This setting directly changes the
setting for alarm recording in the Select Image Pane Content dialog box and vice versa.
Protect Recording (only for NVR recording)
Select a check box to protect the alarm recording of this camera.
Auxiliary Command
Click a cell to select an auxiliary command to be executed in case of an alarm.
Entries in this list are only available for a PTZ camera.
Predefined Position
Click a cell to select a predefined position to be set in case of an alarm.
Entries in this list are only available for a PTZ camera.
Notifications tab
E-mail
Select the check box to send an e-mail in case of an alarm.
Server:
Select an e-mail server.
Recipients:
Type the e-mail addresses of the recipients (example: name@provider.com).
SMS
Select the check box to send an SMS in case of an alarm.
Device:
Select an SMS device.
Recipients:
Type the mobile numbers of the recipients.
Text:
Type the text of the notification.
Information:
Select the check box to add the corresponding information to the notification text.
Note: For an e-mail the date of the time zone of the Management Server is used.
Workflow tab
Record only alarm
Select the check box to specify that the camera is only recorded and not being displayed in
case of this alarm. This check box is only active if the Record check box on the Cameras tab is
selected.
Auto-clear alarm after configured time ('Alarm Settings' dialog box)
Select the check box to specify that this alarm is automatically cleared.
Auto-clear alarm when event state changes back to normal
Select the check box to specify that this alarm is automatically cleared when the event that
triggers this alarm changes its state. The alarm will not be cleared automatically if it is
accepted and unaccepted.
Show action plan
Select the check box to enable the workflow that must be processed in case of an alarm.
2013.03 | V1 | Configuration Client
Configuration Manual
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
