Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch Solution 144
Summary of Contents for Bosch Solution 144
- Page 1 Solution 144 Security Systems User Guide Security System...
-
Page 2: Notice To Owner
Notice to O wn e r Thankyou for selecting the Solution 144 Security Control Panel for your security needs. Your system includes many advanced features and functions which will be programmed and configured by your security consultant during installation. Depending on the configuration, and your access level, you may have the ability to program certain features within the system to suit changes in your security needs. -
Page 3: Table Of Contents
Keypad Hi/Lo Temp..............39 Entry Time 1 ..................20 Site Name ..................39 Entry Time 2 ..................20 Walk Test All Zones ..............39 Part Entry Time ................21 Battery Test ...................40 Inputs ..................21 Installation Details ..............41 Zone Status ...................21 Bosch Security Systems 04/12 BLCC600U... -
Page 4: Program Menu Tree
7-6-0 Holiday Name 5-9-0 Send Test Report 7-6-1 Start Stop Dates System Options 7-7-3 Keypad Hi/Lo Temp 7-7-7 Site Name System Testing 7-9-0 Walk Test All Zones 7-9-1 Battery Test Table 1: Control Panel Menu Tree Bosch Security Systems 04/12 BLCC600U... -
Page 5: Introduction
Fe at u res on, you will usually want all of the zones in your system to be normal, although, you can turn your system on with Listed below are the main features of the Solution 144 faulted zones. control panel. -
Page 6: Reporting Alarms
Medical alarm to be at the same time. triggered. If programmed the sirens for 2 sec will sound and the monitoring station will be notified. Table 2: Keypad Keys and Their Function Bosch Security Systems 04/12 BLCC600U... -
Page 7: Status Icons / Led's
Area is ready to turn All On /Part On heard. If you don’t exit before the delay time Tone Not ready, Zone Open expires and an exit delay door is faulted, an alarm occurs. All On Flashing Alarm Bosch Security Systems 04/12 BLCC600U... -
Page 8: Basic System Operation
3. To turn the system (or area) off, enter your PIN, then 1. Enter your PIN + [OFF] to turn the system (or area) press [OFF]. off. The keypad will no longer display the ‘Lock’ or ‘Part’ icons. Bosch Security Systems 04/12 BLCC600U... -
Page 9: Silencing Alarms
[2] [5] [8] [0] + [#] = Log ON timezone access verification. Some features like DTMF [2] + [6] + [2] + [#] = Turn Output 6 OFF disarming and output control need to be enabled by your installer. Bosch Security Systems 04/12 BLCC600U... -
Page 10: Programming Text Using The Keypad
[OK], or press [MENU] to exit without saving. The following additional special characters are available by scrolling using the up and down arrow keys. + - @ # $ “ & % * : ( ) / < > = Bosch Security Systems 04/12 BLCC600U... -
Page 11: Pin Numbers
Ensure that the system (or area) is turned off. without saving. 1. Press [MENU] + [1] + [1] + [1]. The keypad will display a list of available users that you can change their PIN. Bosch Security Systems 04/12 BLCC600U... -
Page 12: Delete Pin
2. Use the [] and [] keys to select the user that you 1. Enter [MENU] + [1] + [2] + [2]. want to add a token for, then press [OK] to select. The system will prompt you to present the token to the keypad. Bosch Security Systems 04/12 BLCC600U... -
Page 13: Edit Token
[OK]. press [OK] to select. Alternatively, you can enter the user number you want to program, then press [OK]. The keypad will prompt you to enter the RF keyfob Bosch Security Systems 04/12 BLCC600U... -
Page 14: Area Assignment
This menu allows the master user to set or change various 3. Press [OK] to save and exit or press [MENU] to exit options for other users on the system. You should discuss without saving. these options with your installer before making changes. Bosch Security Systems 04/12 BLCC600U... -
Page 15: Door Assignment
User Expire Date Ur1 Expire Date 01 Jan 2100 Press OK to SAVE 3. Press [OK] to save and exit, or press [MENU] to exit Figure 3: CM729B Fingerprint reader without saving. Bosch Security Systems 04/12 BLCC600U... -
Page 16: Add Fingerprint
2. Use the [] and [] keys to select the user who’s fingerprint you want to delete, then press [OK] to 1. Enter [MENU] + [2] + [0] + [0]. select. A list of available areas will display on the keypad. Bosch Security Systems 04/12 BLCC600U... -
Page 17: Turn Area On/Off
[OK] to select. A list of different areas will display on the keypad. Alternatively, you can enter the area number you want to turn on or off, then press [OK]. Bosch Security Systems 04/12 BLCC600U... -
Page 18: Chime On/Off
[OK] to Chime is ON, select. Alternatively, you can enter the area number To turn OFF, Press OFF. that you want to program the name, then press To Go Back Press OK [OK]. Bosch Security Systems 04/12 BLCC600U... -
Page 19: Part Mode 1 Name
1. Enter [MENU] + [2] + [1] + [7]. press [OK]. A list of different areas will display on the keypad. The keypad will display the following: Bosch Security Systems 04/12 BLCC600U... -
Page 20: Exit Time
1 or entry time 2. A3 Administration Dept The entry time is the amount of time you have to turn your Press OK or MENU alarm system off once the entry zone have been triggered Bosch Security Systems 04/12 BLCC600U... -
Page 21: Part Entry Time
3. Use the numeric keys to enter the required time in Zn3 Zone 3 Name seconds and then press [OK]. Entry time 1 can be set Press OK or MENU from 0 to 255 seconds. Bosch Security Systems 04/12 BLCC600U... -
Page 22: Set Chime Zones
[OK]. If the zone is not programmed for chime, the keypad If the zone is programmed for Part 2, the keypad will will prompt: prompt: Bosch Security Systems 04/12 BLCC600U... -
Page 23: Smoke Sensor Reset
The keypad will display a list of zones that are 3. Use the [] and [] keys to scroll the cursor left and available to be tested via walk test. right across the zone name text. Use the [] and Bosch Security Systems 04/12 BLCC600U... -
Page 24: Outputs
To turn the output on, press [ON]. Press OK or MENU The keypad will display the following when the The keypad will display the following when the output is on: output is off and missing: Bosch Security Systems 04/12 BLCC600U... -
Page 25: Output Array
1. Enter [MENU] + [4] + [0] + [4] and use the up and down arrows to select the door group to view. The keypad will display the following output array information for outputs 1 to 16. Bosch Security Systems 04/12 BLCC600U... -
Page 26: Door Override
[] keys to scroll through the different characters available. To clear all text from the cursor position to the right, press the [OFF] key. 4. Press [OK] to save and exit, or press [MENU] to exit without saving. Bosch Security Systems 04/12 BLCC600U... -
Page 27: External Siren Test
2. Use the [] and [] keys to select the area that you want to test the internal sirens in, then press [OK]. Alternatively, you can enter the area number, then press [OK]. Bosch Security Systems 04/12 BLCC600U... -
Page 28: Call/Answer Ras
Reserved for future use call attempts are reached. Comms > Commands > To acknowledge the call, the user needs to press the [#] key Email System Log MENU 5-0-4 on their telephone. Reserved for future use Bosch Security Systems 04/12 BLCC600U... -
Page 29: Destination 2
If the control panel is not programmed to report using one of the self monitoring formats, the 1. Enter [MENU] + [5] + [1] + [6]. keypad will display the following: The keypad will display information for telephone number 1. Bosch Security Systems 04/12 BLCC600U... -
Page 30: Call Forward Off
Note To enter this character press the 1 key repeatedly until the symbol appears in the display. Comms > Remote Access > User RAS PIN MENU 5-3-8 Reserved for future use Bosch Security Systems 04/12 BLCC600U... -
Page 31: Email Options
Press OK or MENU Enter programming mode (PIN + MENU) then, 1. Press [MENU] + [6] + [0] + [7]. If the test is successful, the keypad will prompt: The keypad will display: Bosch Security Systems 04/12 BLCC600U... -
Page 32: Contrast
2. Use the [] and [] keys to select the phone number to add or change, then press [OK] to select. 3. Press [OK] to save and exit, or press [MENU] to exit without saving. The keypad will display the following: Bosch Security Systems 04/12 BLCC600U... -
Page 33: Trigger Table 2
[OFF] key to clear the whole number and then enter the new number using the 0-9 keys. 4. Press [OK] to save and exit, or press [MENU] to exit without saving. Bosch Security Systems 04/12 BLCC600U... -
Page 34: System Events
Solution 144 User Guide System Events Panel 1 Solution 144 Ver 2.00 Options in this section relate to programming of system Date And Time wide options and interpretation of system trouble events Press OK or MENU when and if they occur. Some events such as open zones will appear as single events while others may be grouped together. - Page 35 The system memory has reset to factory default. You should contact your security company. Service Mode The security installer has entered service mode. Phone In Use The system is using the phone line. Table 8: Control Panel Trouble Messages Bosch Security Systems 04/12 BLCC600U...
-
Page 36: History Log
3. Press [OK] to save and exit, or press [MENU] to exit E202 Sun,01Apr 03:41:45 without saving. Disarmed by User Area 1 Name Ur1 User 1 Name E202 Dest= SLL----- Kp1 Keypad 1 Name Panel 1 Dest 1 at 01-Apr 03:41:57 Bosch Security Systems 04/12 BLCC600U... -
Page 37: Volume
Tz1 24 Hour TimeZone Press OK to SAVE Tz2 TimeZone 2 Name Tz3 TimeZone 3 Name Press OK or MENU 4. Enter the new start and stop times in 24-hour format (00:00:00 to 23:59:59 hours). Bosch Security Systems 04/12 BLCC600U... -
Page 38: Day
Alternatively, you can enter the holiday number, [OK]. then press [OK]. 4. Select the perod to edit from the list and press [OK]. The keypad will display the holiday start date: The keypad will display the list of current options. Bosch Security Systems 04/12 BLCC600U... -
Page 39: Keypad Hi/Lo Temp
Use the [] and [] keys to scroll the cursor left and When all zones have been tested, the keypad will right to view the entire name. The default site name is display: “MyAlarm” Bosch Security Systems 04/12 BLCC600U... -
Page 40: Battery Test
Press OK to continue To Go Back Press OK If the battery has failed the test, the keypad will display: Battery test Failed. Please Call for Service. To Go Back Press OK 2. Press [OK] to exit. Bosch Security Systems 04/12 BLCC600U... -
Page 41: Installation Details
Solution 144 User Guide I n sta l l at io n De t ails INSTALLED BY: DATE PHONE: FAX: EMAIL: SERVICE PHONE: FAX: EMAIL: MONITORED BY: PHONE: FAX: EMAIL: WARRANTY EXPIRES: NOTES: Bosch Security Systems 04/12 BLCC600U... - Page 42 Internal Siren Test ..............27 Device Status ................31 Doors Names ..................26 Door Array ................ 25, 26 Status ..................24 Strobe Test ................27 Door Assignment ..............15 Door Status ................25 Turn On/Off ................24 Bosch Security Systems 04/12 BLCC600U...
- Page 43 TimeZones Name ..................37 Options ................... 38 Set Days .................. 38 Set Start/Stop Times ............37 User Access ................14 Tokens Add ..................12 Delete ..................12 Edit ..................13 Status ..................12 Trouble..................34 Bosch Security Systems 04/12 BLCC600U...
- Page 44 Bosch Security Systems 25 Huntingwood Drive Huntingwood, NSW 2128 Australia Phone: +612 9672 1777 Facsimile: +612 9672 1717 © 2012 Bosch Security Systems BLCC600U Issue FTR1.1...