Table of Contents
Advertisement
76
en | Configuring devices
7.27
Adding a VRM device with iSCSI storage
Main window >
In your network, you need a VRM service running on a computer, and an iSCSI device.
Caution!
When you add an iSCSI device with no targets and LUNs configured, start a default configura-
tion and add the IQN of each encoder to this iSCSI device.
When you add an iSCSI device with targets and LUNs pre-configured, add the IQN of each en-
coder to this iSCSI device.
See Configuring an iSCSI device, page 76 for details.
7.28
Configuring an iSCSI device
After adding VRM devices, iSCSI devices, and encoders, perform the following tasks to ensure
that video data of encoders is stored on the iSCSI devices or video data can be retrieved from
these iSCSI devices:
–
–
Note:
Not all iSCSI devices support the default configuration and automatic IQN mapping.
To perform the default configuration of an iSCSI device:
1.
2.
3.
4.
5.
To scan the iSCSI device:
1.
2013.03 | V1 | Configuration Client
Devices >
Execute the default configuration to create LUNs on each target of the iSCSI device.
This step is optional. You do not need to perform this step on an iSCSI device with LUNs
pre-configured.
Scan the iSCSI device to add the targets and LUNs to the Device Tree after default
configuration.
Expand the appropriate VRM device
.
Click the Basic Configuration tab.
LUNs are created on the targets of the iSCSI device.
Format these LUNs.
See Formatting a LUN, page 78.
When the process has finished, click
Click
to activate the configuration.
Expand the appropriate VRM device
.
and
to save the settings.
and
Configuration Manual
Bosch Video Management System
, click the appropriate iSCSI device
, click the appropriate iSCSI device
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
