74
en | Configuring devices
7.20
Configuring a peripheral device
Main window >
To configure a peripheral device:
4
For detailed information on the various fields, see the Online Help for the appropriate
application window.
7.21
Configuring network monitoring
Main window >
To configure the SNMP trap receiver:
1.
2.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
7.22
Configuring a Bosch IntuiKey keyboard (workstation)
Main window >
To configure a Bosch IntuiKey keyboard connected to a workstation:
1.
2.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
7.23
Configuring a Bosch IntuiKey keyboard (decoder)
Main window >
Notice!
i
You cannot connect a VideoTec DCZ keyboard to a decoder.
To configure a Bosch IntuiKey keyboard connected to a decoder:
1.
2.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
2013.03 | V1 | Configuration Client
Devices > Expand
Change the required settings.
Devices> Expand
Click
to display the SNMP Trap Receiver page.
Make the required settings.
Devices> Expand
Click the Settings tab.
In the Keyboard Serial Port Settings field, make the required settings.
Devices> Expand
In the Connection column, click a cell, and select the appropriate decoder.
You can also select a workstation, if the Bosch IntuiKey keyboard is connected to it.
A workstation must be configured on the
In the Connection Settings field, make the required settings.
> Expand
>
>
Configuration Manual
Bosch Video Management System
>
or
page.
Bosch Sicherheitssysteme GmbH