Bosch MBV-BPRO-45 Configuration Manual page 67

Bosch Video Management System
To add an analog monitor group:
1.
2.
3.
To add a communication device:
1.
2.
3.
To add a peripheral device:
1.
2.
3.
To add a virtual input:
1.
2.
3.
4.
To add a network monitoring device:
1.
2.
To add a CCTV keyboard:
1.
2.
3.
Bosch Sicherheitssysteme GmbH
Expand , right-click
The Create New Analog Monitor Group dialog box is displayed.
If you already have performed a network scan, and decoders have been detected, there is
already a default analog monitor group available with all detected decoders assigned.
Make the appropriate settings.
Click OK.
The analog monitor group is added to your system.
Expand , right-click
The appropriate dialog box is displayed.
Enter the appropriate settings.
Click OK.
The communication device is added to your system.
Expand , right-click
The appropriate dialog box is displayed.
Enter the appropriate settings.
Click OK.
The peripheral device is added to your system.
Expand , click
The corresponding page is displayed.
Click Add Inputs.
A row is added to the table.
Make the appropriate settings.
Click Add .
The virtual input is added to your system.
Expand , right-click
The Add SNMP dialog box is displayed.
Type a name for the SNMP device.
The network monitoring device is added to your system.
Expand , click
The corresponding page is displayed.
Click Add Keyboard.
A row is added to the table.
Make the appropriate settings.
The keyboard is added to your system.
and click Add Monitor Group.
and click the required command.
and click the required command.
.
and click Add SNMP.
.
Configuration Manual
Configuring devices | en
2013.03 | V1 | Configuration Client
67