Table of Contents
Advertisement
168
en | Devices page
Entry in the Type list
ONVIF
Table 17.1: Protocol settings
VSG Camera Name
Change the camera name if required. This name is used for VRM and for Bosch Video Client.
See also
–
–
17.33
Recording profiles tab (Video Streaming Gateway)
Main window >
Recording tab > Recording Profiles tab
Allows you to switch recording on or off for each VSG camera.
Recording
In the list, select the desired entry.
See also
–
17.34
Multicast tabs (Video Streaming Gateway)
Main window >
Network tab > Multicast tab
Allows you to configure multicast for the assigned cameras.
Enable
Click to enable multicast for this camera.
2013.03 | V1 | Configuration Client
Adding a Bosch camera to a VSG, page 79
Adding an ONVIF camera to a VSG, page 79
Devices > Expand
Switching on VSG recording, page 80
Devices > Expand
Available configuration settings
Stream
ONVIF Media Profile
Contains advanced settings including a specific camera
including amongst others the encoding settings.
Video source
Contains basic video settings including a specific
camera.
Corresponds to a physical video input.
Token
Select a profile number. If you selected Video source,
usually only one entry is available.
Name
Displays the display name of the profile if ONVIF Media
Profile is selected. If multiple names are available,
<multiple> is displayed.
> Expand
> Expand
Configuration Manual
Bosch Video Management System
> Expand
>
>
> Expand
>
>
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
