Changing The Network Address Of A Workstation; Enabling Forensic Search On A Workstation; Assigning An Analog Monitor Group To A Workstation; Configuring An Analog Monitor Group - Bosch MBV-BPRO-45 Configuration Manual

72 en | Configuring devices
7.14

Changing the network address of a workstation

Main window >
To change the IP address:
1.
2.
7.15

Enabling Forensic Search on a workstation

Main window >
You must enable Forensic Search on a workstation.
Note:
Enable video content analysis on each encoder. Use the VCA page of the encoder in the Device
Tree.
To enable Forensic Search:
4
7.16

Assigning an analog monitor group to a workstation

Main window >
You assign an analog monitor group to a Bosch VMS workstation. In the Options dialog box,
you can configure that all workstations can control analog monitor groups regardless of the
setting here.
To assign an analog monitor group:
4
7.17

Configuring an analog monitor group

Main window >
Caution!
You cannot control an analog monitor group from within Operator Client when the connection
to the Management Server is lost or when Operator Client with Enterprise System is used.
You configure the monitors in an analog monitor group logically in rows and columns. This
arrangement does not have to meet the physical arrangement of the monitors.
To configure an analog monitor group:
1.
2.
2013.03 | V1 | Configuration Client
Devices > Expand
Right-click and click Change Network Address.
The Change Network Address dialog box is displayed.
Change the entry in the field according to your requirements.
Devices > Expand
Click to select the Enable Forensic Search check box.
Devices > Expand
In the Assigned Analog Monitor Groups column, select the check box.
Devices > Expand
In the Name: field, type a name for the analog monitor group.
In the Columns: and Rows: fields, enter the desired values.
>
>
>
Configuration Manual
Bosch Video Management System
> Settings page
> Analog Monitor Groups page
Bosch Sicherheitssysteme GmbH