Bosch MBV-BPRO-45 Configuration Manual page 15

Bosch Video Management System
8
9
10
11
This manual guides you through the basic steps of the configuration and operation with Bosch
VMS.
For detailed help and step-by-step instructions read the Configuration Manual and the
Operator's Manual or use the Online Help. You find the manuals as PDF files on your
Setup CD.
Bosch VMS integrates digital video, audio and data across any IP network.
The system consists of the following software modules:
–
–
–
–
Bosch Sicherheitssysteme GmbH
Image pane
Alarm List window
Monitors window
(only available if at least one
analog monitor group has been
configured)
PTZ Control window
Logical Tree window
Favorites Tree
window
Bookmarks window
Map window
Management Server
VRM recording (Video Recording Manager)
Operator Client (VRM recording / DiBos DVRs / iSCSI recording / VIDOS NVRs / local
recording)
Configuration Client
Displays a camera, a map, an image, a document
(HTML file).
Displays all alarms that the system generates.
Allows you to accept or clear an alarm or to start a
workflow, for example, by sending an E-mail to a
maintenance person.
The Alarm List is not being displayed, when the
connection to the Management Server is lost.
Displays the configured analog monitor groups.
Allows you to switch to the next or previous analog
monitor group if available.
Note:
The Monitors tab is not visible if your Operator Client
is connected to more than one Management Server.
Allows you to control a PTZ camera.
Displays the devices your user group has access to.
Allows you to select a device for assigning it to an
Image pane.
Allows you to organize the devices of the Logical Tree
as required.
Allows to manage bookmarks.
Displays a site map. Allows you to drag the map to
display a particular section of the map.
If activated, a map is displayed automatically for each
camera displayed in an Image pane. In this case, the
camera must be configured on a map.
Configuration Manual
Introduction | en
2013.03 | V1 | Configuration Client
15